Amped wireless login

1. Disconnect and Power Off your Existing Extender:-

Firstly, Disconnect your existing extender from your pc, your broadband electronic equipment and its power outlet. If you do not have an existing extender please continue to Step 2.

2. Power Off your electronic equipment:-

Then, Power off the Modem by disconnecting the Modem’s power adapter from the ability outlet. If your electronic equipment encompasses a backup battery, take away the backup battery from your electronic equipment.
3. Connect the High Power Extender to in your Modem:-
  • Firstly, Use the enclosed blue coax cable and connect one finish of the cable to your electronic equipment.
  • Connect the opposite finish of the cable to the blue port on the High Power Extender.
4. Power on your electronic equipment:-
Infix the ability adapter and reinsert the backup battery (if available) to power on the Modem. Permit a moment or 2 for the electronic equipment to initiate.
5. Power on the High Power Extender and connecting it to your Computer:-
  • Firstly, Attach the 2 enclosed Antennas.
  • Secondly, Connect the included grey Ethernet cable to an available network port on your computer.
  • Attach the Power Adapter to the High Power Extender’s PWR port as well as a power outlet.
6. Open your net Browser:-
Enter the setup net address into your browser: http://setup.ampedwireless.com
7. Welcome to the good Setup Wizard:-
The good Setup Wizard can guide you thru the subsequent settings:
  • Web association Settings
  • System Clock
  • Wireless Settings as well as Click begin to start.
8. Configure your internet Connection:-
  1. Firstly, Configure your web settings victimization the automated settings.
  2. More advanced users might like better to configure their association manually by choosing Manual Configuration.
  3. If your web supplier needs that you just login before accessing the web you may have to be compelled to do therefore underneath Manual Configuration.
  4. If the automated Configuration was prospering, you may be directed to a Configuration prospering page.
  5. Click Next to continue.
Set the System Clock – Amped wireless login :-
The System Clock is employed for system logs as well as setting schedules for web access. Click synchronizing to synchronize the System Clock with the time on your pc. Click Next to continue.
Configure your Wireless Settings:-
The default ID of your wireless network is: Amped_Network to change it, enter a brand new name within the SSID field. Users connecting wirelessly to the Extender can use this ID to spot your wireless network. Click Next to continue.
Wireless Security Settings The default Security Key (WPA/WPA2) of your wireless network is – Amped wireless login:-
wireless to change it, enter a brand new key within the Security Key field. The key should be a minimum of eight characters long. Click Next to use your settings. The High Power Extender can bring up. This method might take up to one minute. The page can mechanically reload when the counting. If it doesn’t, you’ll have to be compelled to refresh the page manually or check your association to the extender.

Amped wireless extender SR300 – Setup and installation

Amped wireless extender SR300 – Setup and installation

Before starting setup, it is essential to find an optimal location to place of Amped Wireless dual band SR300 Repeater and Range Extender.

To position your amped wireless dual band SR300 repeater and extender for setup:

  • Position the SR300 repeater at a location where it would receive strong wifi signals from the source/home router, else weak signals would be extended and result in low extended network.
  • Preferable amped extender setup location is midway between the source wireless router and the wireless dead zone area.
  • The signal strength signalling from the home router is preferred to be more than 70% in the amped extender SR300 setup location.

Positioning the Amped Wireless dual band SR300 Repeater at an optimal place allows the strong signal from the home router to be extended and creates a wireless network of strong wifi coverage.

Amped Wireless dual band SR300 Repeater setup – hardware connections

  1. Attach the antennas to their respective antenna ports found on the back of the Amped Wireless dual band SR300 Repeater.
  2. Also, plug in the power adapter attached at PWR port of extender to the power outlet for power supply.
  3. Connect the Ethernet cable to one of LAN orts located on the back of the Amped Wireless dual band SR300 Repeater.
  4. Connect the other end of the same cable to the network port of the computer.
  5. Power on the computer
  6. If the computer has no network signals or is facing issues in accessing the amped extender’s web menu, connect the Amped Wireless dual band SR300 Repeater wirelessly to the computer.
  7. Connect the computer to the wireless network of the Amped Wireless dual band SR300 extender using the default wireless SSID amped_rep2.5GHZ or amped_rep 5 GHZ.
  8. When prompted for security key to connect to the extender’s network, enter the default password as wireless.
  9. The default wireless settings of the Amped Wireless dual band SR300 Repeater network could be located printed on the label or the wifi configuration card.

Note: It is advisable to not connect the Amped Wireless dual band SR300 Repeater wirelessly during amped extender setup to avoid signal interruptions.

  • Firstly, Open a web browser window on your computer connected to the SR300 extender’s wifi.
  • Enter the amped wireless login default web address setup.ampedwireless.com in the web address field.
  • If the launched web browser is causing issues to access the web menu or if the web menu does not launch, try using another web browser.
  • Else, try using another address web IP address 192.168.1.240 in the web address bar.
  • There is no network connection required to access the web menu via setup.ampedwireless.com as it is auto-launched directly from the Amped Wireless dual band SR300 Repeater.
  • As the web menu page auto-launches, the smart setup wizard screen appears on the computer.
  • Click on Next link to begin the Amped Wireless dual band SR300 Repeater setup process.
  • The smart setup wizard would begin scanning for available home router’s network.
  • Click on SCAN link to search for the wireless network to be repeated.
  • Select the router’s Wi-Fi network SSID to be extended using the Amped Wireless dual band SR300 Repeater.
  • If the home network router is dual band, the Amped Wireless dual band SR300 Repeater setup wizard would display SSID of both 2.4 GHz and 5GHz bands.
  • Select either of the two bands, if you wish to extend one wifi band or select both of the wifi bands for extending both the signals.
  • Check if the desired SSID displays signal strength of 70% or greater.
  • If signal strength is too low than 70% or the SSID of your home router is not being shown, the Amped Wireless dual band SR300 Repeater must have been placed too far from the router.
  • Therefore, you must move your Amped Wireless dual band SR300 Repeater to reposition it closer to the source router.
  • Click Next link.
  • Enter the security key for the security enabled SSID you selected.
  • Use separate wireless security keys for 2.4 or 5GHZ bands SSID of home router.
  • Click on next.
  • The Smart setup wizard would notify about established settings after checking the network settings by Connection test.
  • The extension network settings would be displayed with “_RE” prefix at the end of each extended SSID.
  • Though it is not recommended, but you could opt to assign a new wireless network name /SSID for your Amped Wireless dual band SR300 Repeater’s extension network.
  • The default security key for the extended network is “wireless” and should be used to connect the wireless devices to the extended network.
  • You could assign a new security key on the same wireless settings page.
  • Click on next to save the applied Amped Wireless dual band SR300 Repeater’s wifi settings.
  • The smart setup wizard begins the countdown process to finish the setup.ampedwireless.com setup.
  • The Amped Wireless dual band SR300 Repeater would reboot during the setup wizard countdown.
  • It would disconnect from the established connection while it is rebooting.
  • Reconnect the wireless devices to the established extended network.
  • Use the newly assigned SSID and wireless security of Amped Wireless dual band SR300 Repeater’s extended wifi to connect.
  • If you did not assign new SSID and security key, use the default wireless settings to connect the devices to the extended network.
  • The Amped Wireless dual band SR300 Repeater would be setup successfully and the congratulations screen would appear on the computer.

Leave a Comment

Your email address will not be published. Required fields are marked *